HSV561 HDMI 4K KVM Extender over CAT cable

Brief Introduction
HSV561 HDMI point-to-point extender transmits 4K @ 60Hz 4: 4: 4 ultra highdefinition HDMI signals with zero delay through a network cable, and can support up to 60 meters. At the same time, the mouse and keyboard control signals are sent from the receiving end to the transmitting end to realize the USB 2.0 extension function. The product is characterized by supporting 4K @ 60Hz 4: 4: 4 format or lower
resolution, lossless zero-latency transmission; it is the industry's leading solution. In addition, this product can also support remote host power on / off, reset, hard disk operation instructions Echo display; EDID transparent transmission. 12V power supply on either side, working on both sides, so as to meet the needs of customers with various combined functions.

2. Features

• ► Resolution up to 4K@60Hz 4:4:4，zero latency
• ► Compatible with HDMI 2.0; HDMI 1.4
• ► Support host remote power on / off, reset, hard disk running indicator echo
• ► Support EDID P
• ► PoC: 1PCS of 12V DC adapter supply 2 devices

Troubleshooting

TX end: The DATA light works normally and flashes or stays on in sync with the state of the RX light on the DATA light.(Slow flash when not connected to host source, breathing status)

RX side: The DATA light works normally and flashes or stays on in sync with the state of the DATA light on the TX side. (When the TX end is not connected to the host source, it blinks slowly, breathing status) LED light device access indicator, always on when any external device is connected to any USB port;

Green Light status: The audio and video work is extended normally and is always on; (The green light on the TX end can light up, check whether the RX end interface is connected well, or display the device to sleep)

Orange light status: The signal connection is normally on; Blinking once: NO Link; (check the network cable connection between TX and RX)

Flashes twice: Reserved; (Reserved)

Flashes three times: The forward video is normal and the reverse data is abnormal;(Check the network cable connection method and the condition of the HDMI cable connection between the RX end and the display device)

Four flashes: The forward video is abnormal and the reverse data is normal;(Check the length of the network cable, the connection method, and the good condition of the HDMI cable connection between the TX end and the source device, and the RX end and the display device, and confirm that the source and display device are turned onnormally)