Product Description

TCP IP HDMI Extender IR 1 Sender N Receiver 100m 200ft 1080P HDMI IR Extender Over Cat5e/6 UTP Cable rj45 HDMI Over IP Extender

Noted:
1. COST-EFFECTIVE SOLUTION- Extend HDMI audio/video signals over a cost-effective CAT5/5e/6/6a cable up to 525ft, Connect your HDMI source device (PC, game console, Blu-ray player, media player) to the Transmitter, run a CAT5/5e/6/6a cable from the Transmitter to Receiver, then connect your HDTV/projectors from a remote location to the Receiver with an HDMI cable; An HDMI cable is required and sold separately.

2. HDMI Splitter + Extender, Over Router or IP Switch, Support Multi-receiver up to 253pcs- The connection like HDMI source---HSV891IR Sender---CAT5/5e/6/6a cable---switch---CAT5/5e/6/6a cable---Multi-HSV891 IR Receivers---Monitor, HDTV, Projector, or other HDMI screens.

3. Build-in 3.5mm R/L Audio Extractor- Solve Monitor Without Speaker / Poor Sound Quality; Resolution Supported- 1080p@50Hz / 1080p@60Hz / 1080p@24Hz / 1080i@50Hz / 1080i@60Hz / 720p@50Hz / 720p@60Hz / 576i@50Hz / 480p@60Hz

4. IR REMOTE CONTROL(20~60KHZ)- Allow the source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a CAT5/5e/6/6a cable for convenience
​
5. EASY INSTALLATION - Just Plug and Play, No driver required; Surface mountable metal housing with included brackets allows easy placement; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference * Note: A good quality CAT5/5e/6/6a cable is essential in delivering quality content; CAT6/6a is recommended for better performance

This product not only can work as another normal HDMI extender by CAT5/6
cable up to a maxim of 150 meters, but also can transmit HDMI data over a local network. The data could be transmitted over switch, router, and other ethernet devices, and extend the transfer distance to over 20km.
It also could work in broadcast mode, like an HDMI splitter, broadcasting an HDMI signal from one sender to multiple receivers.
HSV891IR supports sending IR remote control signal from receiver side to sender side which could be used to control HDMI source devices.
HSV891IR also integrates an HDMI audio extractor that could extract stereo audio out from the HDMI signal and output via a 3.5mm jacket.
HSV891IR have many professional designs which suitable for various application scenario, especially for engineering project usage. Such as a 5V-12V wide range power supply, and mountable aluminum alloy shielding.

Specification

"Please choose the iterm you need."

Packing List

1. "1 TX + 1 RX" iterm: Sender*1, Receiver*1, IR Blaster*1+IR Receiver*1, Power adapter*2, User Manual*1
2. "1 TX" iterm:   Sender*1, IR Blaster*1, Power adapter*1, User Manual*1
3. "1 RX" iterm:  Receiver*1,IR Receiver*1, Power adapter*1, User, Manual*1